HOME >> Ice Cream >> Soft Ice Cream Machines

Soft Ice Cream Machine Single Flavour 150 Cones Per Hour


quantum
Dimensions H X W X D 960 x 550 x 650 mm
Electrical Supply 15 amp
RefrigerantR134A or R404A

Soft Serve Freezer – Model 218A 150 Cones Per hour (100g cone)
Single Flavor, Countertop, Pump Feed, Touch Button Controls, Stainless Steel Panels



Product Offering
Offer all popular soft serve variations from low or non-fat ice cream to custards, yogurt and sorbet.

Freezing Cylinder
One, 1.7 liters (1.8 quarts)

Mix Hopper
One 12.5 Liters (13.2 quarts)
Separate hopper refrigeration (S.H.R.) maintains mix temperature below 5ºC (41ºF) under Mix Refrigeration mode.

Mix Low Indicator
When mix level is low, the Mix Low light turns "ON" to alert operator to add mix.

Hardness Indicator
Displays hardness status of the refrigerated product to ensure product quality

Standby
During long no-use periods, the standby feature maintains safe product temperature in the mix hoppers and freezing cylinders.

Electronic Controls
The microprocessor controls automatically regulate refrigeration by monitoring product temperature and viscosity to maintain consistent quality.

Specifications
WeightKg/lb
Net140 / 309
Shipping160 / 353


Packaging Volume: 0.59 CBM / 20.84 CBF
DimensionsNet (mm/in)Shipping (mm/in)
Width550 / 21.7650 / 25.6
Depth650 / 25.6780 / 30.7
Height960 / 37.81160 / 45.7
ElectricalMaximum Fuse SizeMinimum Circuit AmpacityPoles (P) Wires (W)
220-240/50/1~15123P 3W
208-230/60/1~20143P 3W
208-230/60/3~2014/ 4W


Electrical
One dedicated electrical connection is required. See electrical table for electrical requirements. Unit shall be cord connected for single phase units and permanent connected for 3 phase units. Consult us for available cord & receptacle specifications as per local codes.

Beater Motor
One, 2 HP

Refrigeration System
Main refrigeration:
One compressor: 3150 BTU/hr. R404a
Separate hopper refrigeration (S.H.R.):
One compressor: 420 BTU/hr. R134a
(BTU may vary depending on compressor used.)

Air Cooled
Required clearance: minimum 152mm (6") on both sides. Unit rear must be placed against a wall to prevent recirculation of hot air. Minimum air clearances must be met to assure adequate air flow for optimum performance.

Note
Continuing research results in steady improvements; hence specifications listed here are subject to change without notice.

Price on application





review this productBought this item? Review it!

recommend a friendRecommend to a friend



View Customer Feedback

Click here to view feedback from shoppers who have already bought items from this website