Soft Ice Cream Machine Twin Twist Floor Stand 540 Cones Per hour
| 100 Gram Cones per hour | 540 |
Soft Serve Freezer – Model 378
Twin Twist Flavor, Floor Model, Independent Refrigeration System for Each Cylinder, Gravity Feed, Touch Button Controls, Stainless Steel Panels
Product Offering
Offer all popular soft serve variations from low or non-fat ice cream to custards, yogurt and sorbet.
Freezing Cylinder
2×3.2 Liters (3.4 quarts)
Mix Hopper
2×16.5 Liters (17.4 quarts)
Separate hopper refrigeration (S.H.R.) maintains mix temperature below 5ºC (41ºF) under Mix Refrigeration mode.
Mix Low Indicator
When mix level is low, the Mix Low light turns “ON” to alert operator to add mix.
Hardness Indicator
Displays hardness status of the refrigerated product to ensure product quality.
Standby
During long no-use periods, the standby feature maintains safe product temperature in the mix hoppers and freezing cylinders.
Electronic Controls
The microprocessor controls automatically regulate refrigeration by monitoring product temperature and viscosity to maintain consistent quality
Specifications| Weight | Kg/lb | | Net | 240 / 530 | | Shipping | 260 / 574 |
Packaging Volume: 0.98 CBM / 34.61 CBF| Dimensions | Net (mm/in) | Shipping (mm/in) | | Width | 600 / 23.6 | 700 / 27.6 | | Depth | 700 / 27.6 | 800 / 31.5 | | Height | 1540 / 60.6 | 1750 / 68.9 |
| Electrical | Maximum Fuse Size | Minimum Circuit Ampacity | Poles (P) Wires (W) | | 380-415/50/3~ | 25 | 20 | / 5W | | 420-480/60/3~ | 25 | 20 | / 5W | | 208-230/60/3~ | 30 | 28 | / 4W |
Electrical
One dedicated electrical connection is required. See electrical table for electrical requirements. Unit shall be cord connected. Consult us for available cord & receptacle specifications as per local codes.
Beater Motor
Two, 2×1.5 HP
Refrigeration System
Main refrigeration:
Two compressors: 2×5500 BTU/hr. R404a
Separate hopper refrigeration (S.H.R.):
One compressor: 420 BTU/hr. R134a
(BTU may vary depending on compressor used.)
Air Cooled
Required clearance: minimum 150mm (6”) on both sides. Unit rear must be placed against a wall to prevent recirculation of hot air. Minimum air clearances must be met to assure adequate air flow for optimum performance.
Note
Continuing research results in steady improvements; hence specifications listed here are subject to change without notice
Price on Application
View Customer Feedback
Click here to view feedback from
shoppers who have already bought
items from this website
|
|
Bought this item? 
